CONTAC MU Multi-Use Adhesive
CONTAC MU multi-use adhesive – specifically designed for construction applications such as foundation insulation (xps & eps), chamfer / reveal (wood & pvc), plastic sheeting, asphaltic membranes, expansion joint (foam, fiber, cork, sponge rubber), fiberglass, glass, fabrics, foam, cork and particle board.
For best results, ensure that the adhesives and substrates have been conditioned above 60°F. Make sure that the surfaces are dry and free from dirt, grease, oil or other contaminants. It is always good practice to test specific substrate bonding prior to job. Ensure that the valve on canister is fully open. Position gun 8 to 10 inches away from surface and spray CONTAC MU Multi-Use Adhesive evenly across the surface without puddling. Spray adhesive on both surfaces to be adhered, horizontally for one and vertically for the other. Allow to dry 2 to 4 minutes until tacky and then join surfaces together applying firm pressure evenly across the bond surface. After use, engage the trigger lock on spray gun and store canister in dry area away from direct sunlight.
